With the increasing spread of high-voltage power semiconductor components build with silicon carbide (SiC) technology, which operate at switching frequencies above 100 kHz, the requirements for their gate control are becoming more and more demanding. Besides the bipolar, positive and negative driving voltages fo
This coil is designed for high-efficiency DC/DC converters in automotive applications. The characteristic features of this flat-wire coil with its MnZn core are its high rated current (IR 38-47 A) and a high saturation performance. At an RDC value of 0.6 to 1.1 Ω, its resistance is lower than that of comparable c
Harsh environments with critical levels of H2S can be found especially in paper production, mining, wastewater and petrochemical processing as well as in the rubber industry.H2S is the most critical corrosive contaminant for power semiconductors.
During operation, IGBT modules are usually heated up to high temperature l
The proven 62 mm device has been designed in half-bridge topology and is based on the trench chip technology. It opens up silicon carbide for applications in the medium power range starting at 250 kW – where silicon reaches the limits of power density with IGBT technology. Compared to a 62 mm IGBT module, the
With a fully integrated 110mΩ high-side power MOSFET and 80mΩ low-side power MOSFET, it provides high-efficiency step-down DC-DC conversion from 5V and 3.3V input rails. The converter has been developed for use in automotive applications including infotainment systems, instrumentation clusters, telematics, a
In the past ten years, Infineon has sold more than 50 million EasyPACK modules with different chipsets for a wide range of industrial and automotive applications. At the same time, the semiconductor manufacturer has successfully established its extensive portfolio of CoolSiC products in industrial applications.
The device targets applications such as anomaly detection systems used in measurement and control equipment along with sensors that work with very small signals.
The proliferation of IoT in recent years has led to a significant increase in the number of electronic components used for advanced control in a v
These new products further expand the TDK-Lambda GENESYS+ series, offering up to 1,000W output power in a choice of full or half-rack package sizes. The GENESYS+ series is ideally suited for bench-top or rack-mount equipment in a wide variety of OEM, industrial and laboratory applications.
Ten models are avai
The respective peak-current capability of the ferrite beads is exactly specified. They are characterized by a high rated current of up to 10 A and extremely low resistances. WE-MPSA ferrite beads are available in the construction sizes 0805, 1206, 1612, 1812, 2220, and 3312 and can also in some cases be supplied
Constructed with an aluminum canister design, both the C44U-M and C44P-R power film series address the increasing demand for high-power conversion systems in green energy and industrial applications. These capacitors also support power conversion in en-ergy storage systems, IGBT and wide bandgap (WBG) semiconduct
SiC power devices have been adopted increasingly in onboard vehicle chargers and DC/DC converters. These devices provide several advantages compared to silicon-based power devices such as IGBTs. One key benefit: significantly lower losses during both switching and conduction along with being able to operate at hi
The single-package sensor signal conditioner (SSC) delivers best-in-class performance, increased design flexibility, and cost efficiency in a compact form factor for HVAC applications used in plug-in hybrid electric vehicle (PHEV), Battery Electric Vehicle (BEV), and Fuel-cell Ele
The 8.7 x 3.0 x 2.0 mm WS-SLSU SPDT switch is a slide switch in horizontal design, which is attached to the outer edge of the PCB as a SMT mountable component. Würth Elektronik also offers WS-TASU (6.2 x 3.0 x 3.5 mm, actuating force 160 gf), a switch for edge connection. The new miniaturized buttons, which are suitable
The move follows SIGA’s acquisition of the business and assets in February of Wolverhampton-based Stabilised Transformers Limited. Their current transformer capability includes open or enclosed types of dry transformers and inductors, and extends through double wound and auto wound components, toroidal wound
The SMDs are AEC-Q200 qualified as part of Würth Elektronik's automotive electronics portfolio. WE-CBA features high-quality Ni-Sn electrodes, a very high current carrying capacity up to 6 A, and operating temperatures from -55 to +125ºC. The ferrites, which are available in various specifications, are ideally
Founded in 1959, SEA supplies high-value assets which are expected to provide a return over decades. Quality, durability, safety and reliable performance are therefore key characteristics that customers are looking for when they specify a new transformer or reactor.
Transformers play a crucial role in the transmission
With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor opens up new design options.
Due to the small WLB-5 package (1.13 mm x 0.93 mm x 0.59 mm) and its low current consumption of 7 nA in power-down mode, the new magnetic sensor is also suitable for use
Version 5.0 offers new features, enhancements and customisation options that have been developed following feedback from users. The new release coincides with the 10-year anniversary of DesignSpark.
Developed in conjunction with Ansys Inc., the leading provider of flexible and affordable 3D modelling software
TTI, Inc., is now offering Osram’s SFH4259 Series of High-Power Infrared LEDs. These devices are state-of-the-art components designed to meet the stringent requirements of medical, industrial and automotive applications characterized by long life, high performance and first-class reliability. With a typical ra
The claim is made by developer Search For The Next (SFN).
The first devices to use Bizen are members of the QJT (Quantum Junction Transistor) family which will include three parts rated at 1200V/75A, 900V/75A and 650V/32A, available in the industry-standard TO247 or TO263 power MOSFET packages. Of extreme signif
They all focus on a simple and effective design approach which is unique to those Traco Power Products. By innovative engineering we have come up with an electrical design which minimizes component and labor costs. Key focus of those designs was to maximize the amount of automatization of the manufacturing process.
Giovanbattista Mattiussi, Product Marketing and Dr. Diogo Varajao, Senior System Application Engineer, Infineon Technologies
The global trends - such as digitalization and energy efficiency - that have emerged and accelerated in the past few years pose new challenges to the manufacturers as well as the semiconductor market. Developing power semiconductor devices that contribute to highly efficient power management systems is on the ag
Laird Thermal Systems has developed a thermoelectric module series that is rated for high temperature in emerging optoelectronic applications. The HiTemp ETX Series thermoelectric cooler has a robust construction that allows it to survive in temperatures up to 150°C, exceeding most outdoor applications. It is a
