Design Centers
    Powering Communications
    STMicroelectronics' EFL700A39 EnFilm™ Rechargeable Lithium Batteries

    STMicro's long-life paper-thin EFL700A39 EnFilm rechargeable batteries now at Mouser

    07/16/2014

    Mouser Electronics is now shipping STMicroelectronics' EFL700A39 EnFilm™ Rechargeable Lithium Batteries. At 25.7x25.7mm, these batteries are about the size of a postage stamp and are almost as thin, with a thickness of only 0.22mm. Nominal battery voltage is 3.9V with a capacity of 0.7mAh. This battery can supply a maximum pulsed current under load of 10mA.

    The STMicroelectronics EFL700A39 Rechargeable Lithium Battery, available from Mouser Electronics, is one of the thinnest batteries of its type. The battery has a lithium cobalt oxide (LiCoO2) cathode which gives the battery a higher capacity for its size, a lithium phosphorus oxynitride (LiPON) ceramic electrolyte which helps increase the overall energy density of the battery, and a lithium anode. The internal resistance of the EnFilm battery is only 100 ohms.

    The EnFilm is an all solid-state battery designed to be ultra-thin. It boasts a fast recharge time, and with a charging voltage of 4.2V can charge to 80% of its capacity in 20 minutes. The EnFilm boasts a low capacity loss over a long cycle life. In storage, the EnFilm loses only 3% of its charge over a year which can be recovered by a recharge. Over a ten year lifecycle the battery will lose 20% of its capacity like most lithium batteries.

    The EnFilm battery is in full compliance with the IEC 62133 safety standard for non acid batteries. It also meets both the ISO7816 and IEC10373 mechanical and flexibility standards for smartcards.

    Target applications for these EnFilm batteries include Internet of Things applications, sensors and sensor networks, smart card applications, RF ID tags, energy harvesting devices, non implantable medical devices, backup power, and wearable applications.

    EnFilm batteries

    Mouser Electronics

    Related

    Power Systems Design

    146 Charles Street
    Annapolis, Maryland 21401 USA

    Power Systems Design

    Power Systems Design is a leading global media platform serving the power electronics design engineering community. It delivers in-depth technical content, industry news, and product insights to engineers and decision-makers developing advanced power systems and technologies.

    Published 12× per year across North America and Europe, Power Systems Design is distributed through online and fully digital editions, complemented by eNewsletters, webinars, and multimedia content. The platform covers key areas including power conversion, semiconductors, renewable energy, automotive electrification, AI power systems, and industrial applications—supporting innovation across the global electronics industry.